Search Results for loads
Explore AI generated designs, images, art and prompts by top community artists and designers.
Ok heres what I want you to make. The image will be the background for a board game board , though its not integral for the main design of the board , i want nice background art. Design: A nice blend of natural biomes , include forests , plains , ocean , mountains , deserts , swamps - make sure it blends well though. Because its a gameboard I want only 1 section to be the sea so pick a corner Layout: Landscape rectangular , to fit A2 paper size , but please go bigger for more detail Colours: Slightly pastel , soft , but not too washed out , it still needs to be vibrant. No pure black/greys , just a darker colour Theme: A blend of cartoony and oil painting , include shading , and loads of detail , Perspective: A birds-eye view , directly top down , but add a very slight angle - almost isometric Extra info: Please dont add any crazy features like volcanos erupting , it should be serene. No manmade structures , just natural landscapes. No features like rivers or mountains that run from one end of the image to the other splitting it. The actual board game will have a circular piece in the middle that will go on top of the board that will obstruct a small section in the middle , take this into consideration and work around that if you can , just add minimal detail there or something that works instead of just blanking it out. If possible as well it might look good to have different biomes in different places on what will be the board. Please don't add any game spaces or game related features - its just nice background art Thanks! ,
https://sitetive.com/wp-content/uploads/2022/07/sisoyJB.png anime byrossdraws and liya nikorov and simon stalenhag and magali villeneuve and luxearte , mods , and Artgerm , tank , inspired by graphic novel cover art , DnD trending on artstation , realistic portrait full body , large eyes , by andrew robinson , architectural , ( ilya kuvshinov ) , artstation 3 d render , art by artgerm and H R Giger and alphonse mucha , lit by morning light , passionate , hres , dream - like heavy dark mysterious nightmare atmosphere , shaman , art nouveau aesthetic ,
3.Bridge Configuration 1.The bridge may cross the valley at any elevation from the high water level that you can assume to 24 meters above the high water level. 2.If the elevation of the bridge is below 24 meters , excavation of the river banks will be required to achieve the correct highway elevation. 3.To provide clearance for overhead power lines (shown above) , the highest point on the bridge may not exceed an elevation 32.5 meters above the high water level (8.5 meters above the top of the river banks). 4.The bridge may consist of either standard (simple supports) or (arch supports). If necessary , the bridge may also use one intermediate , located near the centre of the valley. If necessary , the bridge may also use cable , located 8 meters behind one or both abutments. 5.Each main truss can have no more than 100 and no more than 200 . 6.The bridge will have a flat , reinforced deck. Two types of concrete are available: 1.Medium-strength concrete requires a deck thickness of 23 centimetres (0.23 metres). 2.High-strength concrete requires a deck thickness of 15 centimetres (0.15 meter). 7.In either case , the deck will be supported by transverse spaced at 4 metre intervals. To accommodate these floor beams , your must have a row of joints spaced 4 meters apart at the level of the deck. These joints are created automatically when you begin a new design. 8.The bridge deck will be 10 meters wide , such that it can accommodate two lanes of traffic. 4.Member Properties •Materials. Each member of the truss will be made of either carbon steel , high-strength low-alloy steel , or quenched and tempered steel. •. The members of the truss can be either solid bars or hollow tubes. Both types of cross-sections are square. •Member Size. Both cross-sections are available in a variety of standard sizes. 5.Loads The bridge must be capable of safely carrying the following loads: •Weight of the deck. •Weight of a 5-cm thick , which might be applied at some time in the future. •Weight of the steel floor beams and supplemental bracing members (assumed to be 12.0 applied at each deck-level joint). •Weight of the main trusses. •Either of two possible truck loadings: Weight of one standard H25 truck loading per lane , including appropriate allowance for the dynamic effects of the moving load. (Since the bridge carries two lanes of traffic , each main truss must safely carry one H25 vehicle , placed anywhere along the length of the deck.) Weight of a single 480 kN Permit Loading , including appropriate allowance for the dynamic effects of the moving load. (Since the Permit Loading is assumed to be cantered laterally , each main truss must safely carry one-half of the total vehicle weight , placed anywhere along the length of the deck.) ,
3.Bridge Configuration 1.The bridge may cross the valley at any elevation from the high water level to 24 meters above the high water level. 2.If the elevation of the bridge is below 24 meters , excavation of the river banks will be required to achieve the correct highway elevation. 3.To provide clearance for overhead power lines (shown above) , the highest point on the bridge may not exceed an elevation 32.5 meters above the high water level (8.5 meters above the top of the river banks). 4.The bridge may consist of either standard (simple supports) or (arch supports). If necessary , the bridge may also use one intermediate , located near the centre of the valley. If necessary , the bridge may also use cable , located 8 meters behind one or both abutments. 5.Each main truss can have no more than 100 and no more than 200 . 6.The bridge will have a flat , reinforced deck. Two types of concrete are available: 1.Medium-strength concrete requires a deck thickness of 23 centimetres (0.23 metres). 2.High-strength concrete requires a deck thickness of 15 centimetres (0.15 meter). 7.In either case , the deck will be supported by transverse spaced at 4 metre intervals. To accommodate these floor beams , your must have a row of joints spaced 4 meters apart at the level of the deck. These joints are created automatically when you begin a new design. 8.The bridge deck will be 10 meters wide , such that it can accommodate two lanes of traffic. 4.Member Properties •Materials. Each member of the truss will be made of either carbon steel , high-strength low-alloy steel , or quenched and tempered steel. •. The members of the truss can be either solid bars or hollow tubes. Both types of cross-sections are square. •Member Size. Both cross-sections are available in a variety of standard sizes. 5.Loads The bridge must be capable of safely carrying the following loads: •Weight of the deck. •Weight of a 5-cm thick , which might be applied at some time in the future. •Weight of the steel floor beams and supplemental bracing members (assumed to be 12.0 applied at each deck-level joint). •Weight of the main trusses. •Either of two possible truck loadings: Weight of one standard H25 truck loading per lane , including appropriate allowance for the dynamic effects of the moving load. (Since the bridge carries two lanes of traffic , each main truss must safely carry one H25 vehicle , placed anywhere along the length of the deck.) Weight of a single 480 kN Permit Loading , including appropriate allowance for the dynamic effects of the moving load. (Since the Permit Loading is assumed to be cantered laterally , each main truss must safely carry one-half of the total vehicle weight , placed anywhere along the length of the deck.) ,
https://www.google.com/imgres?imgurl=https%3A%2F%2Fwww.revistaautocrash.com%2Fwp-content%2Fuploads%2F2022%2F11%2FWM22063-0326.jpg&tbnid=W8-1UzlUvJ1qVM&vet=12ahUKEwjzuZ7uyP_-AhXQq5UCHRZaBwoQMygBegUIARDKAQ..i&imgrefurl=https%3A%2F%2Fwww.revistaautocrash.com%2Fnueva-generacion-de-buses-scania%2F&docid=ZNLYGw7o_V9OfM&w=1200&h=798&q=buses&ved=2ahUKEwjzuZ7uyP_-AhXQq5UCHRZaBwoQMygBegUIARDKAQ , Pencil Sketch , Trippy ,
.jpg){kind=link}
